8-120V Battery Coulometer Coulomb Meter Battery Capacity Tester 50A 100A Lithium Battery Monitor LCD Power Level Display

High-precision battery power display meter, using current calculation (coulomb) accurately display battery power percentage, capacity, current, voltage. Coulomb display meter is not limited to battery type, battery voltage 8-120V can be used on any battery, can timely and accurately grasp the battery working status; In particular, the load with large fluctuation of current and the large current load with intermittent work have excellent use effect, such as all kinds of electric vehicles, sweeper, electric forklift, high-power motor equipment, etc. The electric quantity adopts the liquid crystal display mode, displays more clearly also saves electricity.

Below specification same as above format

1.Work voltage : 10V-100V (8V-120V)

2.The power consumption of the work : 5mA

3.The power consumption of the sleep : 0.3mA

4. Sensor current on the board : 50A , 0-50A  ; 100A, 0-100A

5.Voltage acquisition accuracy / Current acquisition accuracy / Capacity acquisition accuracy : ±0.5 %  

6.Sleep model or wake up ：Current less than 30mA sleep, After hibernation, use the key to enable the hibernation. The hibernation will resume after a delay of 20 seconds Or greater than 50mA wake up ​7.LCD display :

Batery capacity percentage - 0000% ​Battery voltage- 0000V ​Battery current - 0000A ​Battery capacity-0000AH

8.SOC indicat ON-OFF switch : Not need, can work independently

9.Set requirements : Just set the capacity

10.Counnter wires length : 50A-200mm/250mm , 100A-2m

11.Size : 61.3 X 335 X 13.5 mm